内页-产业资讯banner
Location:Home - Organization - Introduction
Focus on aluminum processing industry technology forum-3, listen to the voice of fans
Font size:SMB

The third stage of the aluminum processing industry technology network forum of the explosive aluminum industry circle was successfully concluded on June 13. The forum is full of dry goods brought by industry bigwigs. You can say that you can make a lot of profits. At the same time, they hope to learn more about the needs of enterprise management, technology improvement, lean production and new trends in the industry. Aluminum plus network invited a number of industry experts, business managers to share their views.

Zhu Zufang, Professor of Beijing General Institute of nonferrous metals, said in an interview with aluminum plus network reporter that through the rapid development of these years, the achievements of aluminum surface treatment technology in China are obvious to all, but there are also some problems in the development process. In recent years, we have emphasized the innovation. In terms of the surface treatment of aluminum profiles, innovation should be based on the premise of real environmental friendliness. Reducing environmental quality is not innovation. At present, the quality of architectural aluminum profile products in China has been greatly improved. From the aspects of casting, extrusion, mold, surface treatment and other aspects, the equipment level, process characteristics and product quality of surface treatment technology can reach the international advanced level. However, in the field of surface treatment of non building aluminum materials such as aluminum sheet, die-casting aluminum parts and electronic products, although a considerable scale has been formed, the technical level and product quality are gradually approaching the international level. But in general, its scale and quality are behind the surface treatment level of aluminum profiles. This is also an area that we need to pay special attention to and tackle in the future.

Professor Zhu has been active in the front line of aluminum surface treatment field for decades. He has always devoted himself and selflessly to the industry. He has high hopes for the younger generation in the aluminum processing industry. "He hopes to gather more young people in the aluminum processing industry, and scientific research institutions and industrial enterprises can provide a platform for the future technological backbone to grow and exercise. We can do more in strengthening the study of theoretical knowledge, strengthening the research of basic materials, gradient training of technical personnel and improving the quality of personnel. We should carry forward the down-to-earth "craftsman spirit" in our research and technical work. Step by step, you can walk firm and go far. " Professor Zhu said earnestly.

As for the first attempt to share a report live online, Professor Zhu said: "personally, I still like to give a report in the lecture hall. With real-time feedback, I can better understand the needs of the audience, and the interaction is closer to reality. However, novel coronavirus pneumonia is still in the stage of prevention and control. The online forum can undoubtedly provide a convenient way for the vast number of industry colleagues to understand new technologies and new thinking. Live network is very convenient, for me, but also a huge challenge, I need to learn how to better operate the mobile phone, in the live room to meet you. Thank you very much for your attention and support. "

Multi party cooperation

How about it? I listened to Professor Zhu's advice

Is the passion surging again

you 're right

They can't bear to move inside

Professional speech and witticism in the Live Room

It's all sent to us

It's just about to happen

Let's listen to their voices

Lin Shuwei, LB aluminum, Malaysia:

The Guangdong industry forum in China has benefited us a lot. We Malaysian aluminum enterprises also share this forum. Now we have entered the era of intelligent information technology, we hope to know more about the application of intelligent machines and equipment, so as to reduce labor force, save energy and improve efficiency, so as to survive in the competition in the digital age. In addition, we should pay attention to the trend and technology development of industries such as aerospace and automobile. Network forum let us understand and learn more new technology, new equipment and new technology in the industry, and get greater improvement in the future development of enterprises.

Minfa Aluminum Co., Ltd

In the macro development of the whole industry, we firmly believe that aluminum processing has a bright future. Enterprises should use innovative thinking to drive high-quality development, upgrade and refine enterprises, so that more people can master the market characteristics of the industry and focus on intensive cultivation. Using aluminum to replace other materials can promote industrial upgrading, industrial extension and expand new uses of aluminum materials.

In terms of market effect, enterprises must show high quality to customers, reduce internal consumption, upgrade the whole process and equipment to automation and mechanization, upgrade equipment, and replace manual operation with mechanical intelligence. We are committed to modernizing the production and management of the enterprise. At present, intelligent manufacturing is an inevitable trend in aluminum processing. Intellectualization is a means to optimize manufacturing environment and achieve quality stability. However, at present, enterprises have to follow the gradual, combined with their own existing characteristics can be partially promoted, such as finished products automatic warehouse, mold automatic warehouse, extrusion automatic framing, etc., information construction is inevitable for enterprises, and enterprises will touch into 5g construction in the future.

Actively participating in the drafting of ISO electrophoresis composite film international standard and actively promoting enterprise standardization construction is my main work for many years, because participating in the international standard drafting can strengthen the technical cooperation between Chinese enterprises and international enterprises, on the other hand, it can bring China's aluminum and aluminum alloy oxygenated composite film into the products of international standards, and eliminate the technical barriers of China's aluminum profile products export. Speed up the pace of enterprises' integration with international technology and shorten the distance of enterprises' internationalization.

The development of enterprises should pay more attention to the environmental effect and put the environmental effect in the first place. Minfa aluminum industry has carried out chromium free treatment earlier, and has taken the lead in replacing acid pickling process with alkaline cleaning process in aluminum profile processing industry, so as to achieve harmonious development of environmental protection and enterprises and realize green manufacturing.

As for the impression of live broadcast of aluminum processing industry alliance online forum, I personally think that the live broadcast of online forum is very good, and the audience is in their own production site, and the office will watch it. As an enterprise, the network forum is actually the enterprise technology education and training, so we strongly support it. It would be better if some links such as online interaction and guest Q & A could be added. The online forum-3 led by Guangdong (Nanhai) aluminum processing industry alliance has received more than 200000 visitors, which shows that this forum has been fully recognized and loved by the majority of aluminum processing workers.

Li Xiaoquan, Gansu Hongda aluminum Co., Ltd

After watching the live broadcast, we learned some information about new technology, new equipment and new national standard of aluminum doors and windows. We also hope that the future technology forum can further explain the production practice of technology, provide some cases and solutions, and effectively solve the problems in our actual production, so as to improve the production technology level. In the industrial technology network forum, Guangdong (Nanhai) aluminum processing industry alliance has taken the lead and improved the aluminum processing technology in Northwest China. In addition, we also hope that the forum can provide more topics on casting, mold, extrusion, surface treatment and so on.

Ye Guanghua

The habit of welfare thinking must be formed in enterprise culture. Why? Because today's environment requires integration, innovation, and return to customer value. In our enterprise, we have been advocating cadres and employees to develop a good habit, improve cultural knowledge in learning, find problems in work, and then solve them. There are three kinds of thinking orientation to do a good job in an enterprise: the first is to take the customer as the center. Second, cooperation is the way of thinking. Third, the thinking orientation of sustainable development. In my spare time, fitness is also a thing that I must insist on doing.

Made in China, there will be new concepts every year, and many enterprises will encounter many problems in real production. I hope your platform can coordinate and collect production problems, and experts will give some guidance and answers to typical problems. Guangdong (South China Sea) aluminum processing industry alliance is down-to-earth and selfless, we appreciate it very much, give a little praise!

Gao Zhenzhong of Gaodeng Aluminum Group:

China's aluminum industry has experienced a transition from traditional planned economy to modern market economy. All enterprises are also experiencing a gradual process. I think that as a comprehensive manager of an enterprise, we should first pay attention to improving the reform of enterprise management system, and change the highly centralized resource allocation from planning oriented to market-oriented. After the establishment of the system, enterprises must pay close attention to the implementation, strictly implement, implement rewards and punishments, and establish the system implementation mechanism of responsibility transmission.

In the new era, the form of live broadcasting is more efficient, convenient, low-cost, and has the widest audience area. It is worth promoting. Thanks to the epidemic situation, the Guangdong (Nanhai) aluminum processing industry alliance still organizes technical forums for peer learning and exchange in an innovative way, providing convenient learning methods, and the platform is the welfare of everyone.

Liang Guanrong of fen'an Aluminum Group Co., Ltd

In the era of knowledge leading economic development, technological changes are changing with each passing day. Managers at all levels continue to pursue excellence and enhance the profitability of the enterprise. Therefore, R & D and innovation of indispensable technologies and rich actual production are inseparable from the adjustment and control of technology. We hope that the forum can bring technical guidance through case analysis.

Chen Xiong, Huaao Technology Co., Ltd

From the first phase of the aluminum processing industry technology network forum, we organized the staff to watch the third session of the forum, both fluency and audience popularity have been greatly improved, and we are looking forward to the next forum content.

After two years of construction, Hubei Jianli Huazhong ecological aluminum industrial park has been completed, and Jianli government is striving to build it into the largest aluminum processing Industrial Park in Central China. As a promoter of the construction of ecological Aluminum Industrial Park, I also hope to bring the advantages of Guangdong aluminum processing to Jianli, Hubei Province. If I have the opportunity, I also hope to invite director Lu Jiyan to visit Jianli Industrial Park, promote the resource sharing of Hubei Jianli local enterprises and Guangdong aluminum processing technology, fully stimulate the endogenous power of enterprises, create the centripetal force of group development, and jointly make Jianli aluminum industry Big and strong.

Liu Xiaogang, information technology center of China National Coatings (Beijing)

"Dry goods" full! This forum is worth seeing! No matter from the professional, practical, forward-looking technology and experience sharing, it provides a clear direction for the transformation, upgrading and innovation of enterprise technology.

In the context of the impact of the epidemic, seizing the new opportunities of innovation and development is particularly crucial for cultivating new growth points and forming new driving forces for development. Keep abreast of industry trends and explore new development opportunities through learning and communication. Through the contact with Lugong, we feel that Lugong is concerned about the enterprise and the industry, and has no regrets for the development of the enterprise and the industry, which is worth learning.

Affected by the epidemic situation, 2020 is an extraordinary year

Each of us is witnessing history

It's also making history

Hope you have watched the network forum of aluminum processing industry technology

Some inspiration, more gain

At the same time, thanks to many enterprises

Support and trust for aluminum plus network all the time

After watching the network forum of aluminum processing industry technology

Are there any better ideas and suggestions

You can go to the aluminum processing message area

Next issue of aluminum processing industry technology network forum

We will continue to improve and improve

More surprises for you

Coming soon!


Updated:2020-06-18 | Return
This article keywords:
Return